Full face diamond laps

SKU: FL6-060-FF

$49
Grit:
Quantity:

CabKing full face diamond laps are used for both rough and fine grinding on stones and glass. They are also useful for putting flats on larger cabs. These electroplated, no-hole, full face diamond laps are available in a large variety of different grits to choose from.

Our full face diamond laps are manufactured using the highest quality diamonds to provide you a longer grinding life and clean, faster cutting. They are nickel electroplated using commercial grade diamonds uniformly onto a 1mm thick steel plate. That steel plate is then bonded to a 1/4" thick aluminum base with a 1/4"-20 thread on the backside. Since these full face laps do not arbor holes in the middle of them like most laps do, this allows you more surface area to grind larger pieces.

We offer a variety of different grits, ranging from 60# to 3,000#. They screw into the right shaft of the CabKing 6" cabbing machine and the CabKing 8" cabbing machine. You can also use them on other cabbing machine brands that accept a 1/4″-20 thread.

Laps are 6″ diameter with a 1/4″-20 thread on the backside.

Proposition 65 warningWARNING: Prop 65 warning for California residents

You may also like